SPECIFICATIONS
GLASS
All walls and fins are 12mm (1/2") clear tempered glass with finished edges. All
holes on the playing side are countersunk and dimensioned to receive special flush mounted
fittings and hardware. A clear silicone compound is used to bond all joints.
No glass-to-glass or glass-to-metal contact is permitted.
FITTINGS
All glass-to-glass connections are manufactured in hi-tensile GSM Nylatron. All parts
are moulded for maximum strength, are uniform in colour and have a minimum thickness of
3/8" (9.5mm).
Tensile strength: 11,000 to 14,000 lb/in²
(773 to 984 kg/cm²)
Hardness durometer: 2.3
Shear strength: 7,700 to 9,500 lb/in²
(541 to 668 kg/cm²)
DOOR and HARDWARE
The door is centrally located and has a flush mounted pull ring handle on the playing
side.
A knob set with a positive self-latching connection is used on the exterior. This assembly
is milled from a solid block of Nylatron. Hinges are mounted at the quarter points on the
court door, thus significantly reducing the deflection of the glass under impact. The
lower corner of the door opening is fitted with a rubber-faced stop for additional
support. |
|
 BASE
ANGLE BRACKETS
Available in either steel or anodized aluminum.
Size: 12" x 3" x 2 1/2" x 1/4"
(305 x 76 x 63 x 6mm)
ANCHOR BOLTS
Two 7/16" (11mm) dia. x 3 1/2" (89mm) anchor bolts are used for each angle bracket.
ALUMINUM CHANNELS
Size: 1" x 1" x 1/8" (25 x 25 x 3mm)
ALUMINUM ANGLES
Size: 2 1/2" x 1 1/2" x 1/8" (63 x 38 x 3mm)
LINES on GLASS
White lines 30" (762mm) in height are available 1/8" (3mm) in width at 1" (25mm) on centres.
COLOUR
All Nylatron fittings and metal fasteners are black in colour. The door handle assembly
has an anodized aluminum recessed decorative face plate which may be imprinted for
identification.
|
